A radio antenna (or just aerial) is a transducer that can send and receive radio waves (electromagnetic waves) designed for radio, TV, cell phones, radar or satellite. A radio antenna is a transducer with a usable efficiency can perform one or both of these energy conversions: marketable alternating electrical energy for transmission of radio wave energy. Marketable radio wave energy to alternating electrical energy (military antennas).
Within the transmission we can define co-polar diagram that represents the communication from to a desired polarity and polarized radiation pattern with the opposite polarity to that you already have. The most important parameters of the radiation pattern are: pointing direction: The maximum radiation. Directivity and Gain. Main lobe constitutes angular range around the direction of maximum radiation. Side lobes are other relative maxima, lower the principal value.
Beamwidth: The angular range of directions in which the radiation of a beam takes a value 3 dB below the maximum. The direction in which the radiated power is halved. Ratio at the secondary main lobe (SLL): The ratio in dB between the maximum value of main lobe and the maximum value of secondary lobe. Front-back ratio (FBR): The ratio in dB between the value of maximum radiation and the same direction and opposite direction.
Bandwidth is a frequency range in which the antenna parameters meet certain characteristics. Can define impedance bandwidth, polarization, gain or other parameters. Directivity is the impedance of masts at its terminals. It is the relationship between the voltage and the input current. Z = frac V I. The impedance is a complex number. The real part of an impedance is called mast resistance and the imaginary part is reactance.
The antenna resistance is the sum of the transmission resistance and loss resistance. The antennas are called resonant when its input reactance vanishes. Beam is a radiation parameter, linked to a radiation pattern. May define the beam width at -3 dB, which is angular range within which the radiated power density is equal to half of maximum power (in main direction of radiation).
The antenna location should have unrestricted access to just above the the sky. Earth would reflect more or less of radio waves. This depends on: mast placed as high as possible so that there are no obstructions between the transmitter and receiver. Satellite or interstellar radio propagation (Earth to satellite, space shuttle) or (satellite, space shuttle to Earth). There must be no obstructions between the satellite and ground transmitters.
The polarization can be linear, circular and elliptical. Linear polarization can take different orientations (horizontal, vertical, +45, -45). The circular or elliptical polarizations can be right or left (right-handed or left-handed), according to the direction of rotation of the field (observed away from the antenna). Transmitters within decoupling coefficient defined polarization. This measures the amount of power that is capable of receiving a polarized antenna of a form having an effective.
If, in each of these ports, a diplexer, which separates the frequency bands of emission and reception, it will be a feeder four ports with a single antenna will be able to send and receive both polarizations simultaneously placed. At other times, these antennas have only two ports, one for emitting a polarization and the other to receive the opposite polarization.
Within the transmission we can define co-polar diagram that represents the communication from to a desired polarity and polarized radiation pattern with the opposite polarity to that you already have. The most important parameters of the radiation pattern are: pointing direction: The maximum radiation. Directivity and Gain. Main lobe constitutes angular range around the direction of maximum radiation. Side lobes are other relative maxima, lower the principal value.
Beamwidth: The angular range of directions in which the radiation of a beam takes a value 3 dB below the maximum. The direction in which the radiated power is halved. Ratio at the secondary main lobe (SLL): The ratio in dB between the maximum value of main lobe and the maximum value of secondary lobe. Front-back ratio (FBR): The ratio in dB between the value of maximum radiation and the same direction and opposite direction.
Bandwidth is a frequency range in which the antenna parameters meet certain characteristics. Can define impedance bandwidth, polarization, gain or other parameters. Directivity is the impedance of masts at its terminals. It is the relationship between the voltage and the input current. Z = frac V I. The impedance is a complex number. The real part of an impedance is called mast resistance and the imaginary part is reactance.
The antenna resistance is the sum of the transmission resistance and loss resistance. The antennas are called resonant when its input reactance vanishes. Beam is a radiation parameter, linked to a radiation pattern. May define the beam width at -3 dB, which is angular range within which the radiated power density is equal to half of maximum power (in main direction of radiation).
The antenna location should have unrestricted access to just above the the sky. Earth would reflect more or less of radio waves. This depends on: mast placed as high as possible so that there are no obstructions between the transmitter and receiver. Satellite or interstellar radio propagation (Earth to satellite, space shuttle) or (satellite, space shuttle to Earth). There must be no obstructions between the satellite and ground transmitters.
The polarization can be linear, circular and elliptical. Linear polarization can take different orientations (horizontal, vertical, +45, -45). The circular or elliptical polarizations can be right or left (right-handed or left-handed), according to the direction of rotation of the field (observed away from the antenna). Transmitters within decoupling coefficient defined polarization. This measures the amount of power that is capable of receiving a polarized antenna of a form having an effective.
If, in each of these ports, a diplexer, which separates the frequency bands of emission and reception, it will be a feeder four ports with a single antenna will be able to send and receive both polarizations simultaneously placed. At other times, these antennas have only two ports, one for emitting a polarization and the other to receive the opposite polarization.
About the Author:
When it comes to selecting the most suitable military antennas, you can get a lot of help from our website. Take a minute to review the information right here at http://www.hascall-denke.com.
No comments:
Post a Comment